Hourglass Sleeves
Hourglass/Duplex Sleeves
Hourglass Sleeves
Aluminum, Copper & Zinc over Copper
To Federal Specification FF-C-450, Type III, Class I
| Rope Size & Sleeve Size | A in | B in | C in | D in | Weight Per Piece in lbs | Aluminum Part No. | Copper Part No. | Zinc Over Copper Part No. |
|---|---|---|---|---|---|---|---|---|
| 1/16 | 0.17 | 0.25 | 0.08 | 0.38 | 0.0009 | AS116 | CS116 | ZCS116 |
| 3/32 | 0.28 | 0.40 | 0.13 | 0.5 | 0.0032 | AS332 | CS332 | ZCS332 |
| 1/8 | 0.34 | 0.50 | 0.16 | 0.63 | 0.0064 | AS18 | CS18 | ZCS18 |
| 5/32 | 0.38 | 0.56 | 0.19 | 0.69 | 0.0081 | AS532 | CS532 | ZCS532 |
| 3/16 | 0.44 | 0.67 | 0.22 | 1 | 0.0156 | AS316 | CS316 | ZCS316 |
| 1/4 | 0.54 | 0.82 | 0.29 | 1.13 | 0.0252 | AS14 | CS14 | ZCS14 |
| 5/16 | 0.69 | 1.03 | 0.38 | 1.25 | 0.0451 | AS516 | CS516 | ZCS516 |
| 3/8 | 0.75 | 1.16 | 0.44 | 1.44 | 0.0607 | AS38 | CS38 | ZCS38 |
Warning: Dimensions may vary
Hourglass sleeves are shaped with smooth, rounded edges that can be crimped on the end of fraying wire ropes or stainless-steel cables. They are most commonly used for industrial and marine applications.
Hourglass sleeves are made of several different types of metals:
- Aluminum
- Copper
- Zinc over Copper
Aluminum hourglass sleeves are ideal for galvanized steel cable, but not stainless cables. This is the most economical sleeve for loops or lap splices.
Copper hourglass sleeves are ideal for stainless steel cable fasteners.
Zinc over copper hourglass sleeves are the most resistant to corrosion and rust, thanks to the galvanized plating. This finish is optimal for stainless steel cable. When hourglass sleeves are properly swaged and sealed, they are capable of maintaining up to 90% of the cable’s original breaking strength.
Elite Sales offers each type of hourglass sleeve in rope and sleeve sizes ranging from 1/16” to 3/8”. All hourglass sleeves meet Federal Specification FF-C-450, Type III, Class I.
If you are looking for a reliable and trustworthy hourglass sleeve supplier, look no further than Elite Sales.