situs slot gacor
Jaw and Jaw Turnbuckle | Elite Sales Inc. rolex milgauss replica

Jaw & Jaw Turnbuckles

Drop Forged Jaw and Jaw Turnbuckles

Buy Jaw and Jaw Turnbuckles

Drop Forged, Hot Dipped Galvanized
To Federal Specification FF-T791, Type 1, Form 1, Class 7 & ASTM F-1145

Click to Zoom In

Jaws and jaw turnbuckles are used to adjust the length and tension of wire ropes, cables, and tie rods. This combination is commonly used for:

  • Straight pull inline applications
  • Tension systems
  • Marine and outdoor applications
  • Suspension bridges or buildings
  • Aircraft construction

Both the jaw and jaw turnbuckle are drop forged into molds to create a strong, continuous piece of metal. They are then hot-dipped galvanized for a protective layer that prevents corrosion and rust from forming.

Each piece from Elite Sales meets Federal Specification FF-T791, Type 1, Form 1, Class 7, and ASTTM F-1145. You can purchase jaw and jaw turnbuckles in sizes ranging from 1/4×4” to 2-1/2×24” with a maximum working load limit of 75,000 lbs. End fittings are quenched and tempered, bodies are normalized.

Ready to place an order or have further questions about jaws and jaw turnbuckles? Contact Elite Sales today!

Thread Dia & Take UpWorking Load (in)Weight Per Piece in LBSA (in)B Closed (in)E (in)G Open (in)J Closed (in)K Open (in)M Closed (in)N (in)BB (in)Part No.
1/4×45000.360.250.451.580.6210.96.911.97.94HG14X4JJ
5/16×4-1/28000.520.310.51.980.8712.368.3613.99.44.5HG516X412JJ
3/8×6 1,2000.810.380.542.120.8716.1410.1417.3811.386HG38X6JJ
1/2×6 2,2001.500.50.682.751.0617.511.519136HG12X6JJ
1/2X9 2,2001.740.50.682.751.0623.514.525169HG12X9JJ
1/2×12 2,2002.400.50.682.751.0629.517.5311912HG12X12JJ
5/8×6 3,5002.720.630.823.51.3118.812.820.8814.886HG58X6JJ
5/8X9 3,5003.240.630.823.51.3124.815.826.8817.889HG58X9JJ
5/8×12 3,5003.740.630.823.51.3130.818.832.8820.8812HG58X12JJ
3/4×6 5,2004.110.751.034.181.5201422.616.66HG34X6JJ
3/4X9 5,2005.100.751.034.181.5261728.619.69HG34X9JJ
3/4×12 5,2005.650.751.034.181.5322034.622.612HG34X12JJ
3/4×18 5,2007.000.751.034.181.5442646.628.618HG34X18JJ
7/8×12 7,2008.170.881.234.851.7533.3621.3636.3224.3212HG78X12JJ
7/8X18 7,2009.960.881.234.851.7545.3627.3648.3230.3218HG78X18JJ
1X6 10,0008.5011.315.532.0622.7216.7226.0620.066HG1X6JJ
1×12 10,00012.0011.315.532.0634.7222.7238.0626.0612HG1X12JJ
1X18 10,00014.0011.315.532.0646.7228.7250.0632.0618HG1X18JJ
1X24 10,00017.0011.315.532.0658.7234.7262.0638.0624HG1X24JJ
1-1/4X12 15,20021.501.251.867.212.8137.3425.3441.5429.5412HG114X12JJ
1-1/4×18 15,20024.251.251.867.212.8149.3431.3453.5435.5418HG114X18JJ
1-1/4×24 15,20028.001.251.867.212.8161.3437.3465.5441.5424HG114X24JJ
1-1/2×12 21,40030.501.52.257.882.8138.526.543.531.512HG12X12JJ
1-1/2×18 21,40036.751.52.257.882.8150.532.555.537.518HG12X18JJ
1-1/2×24 21,40040.671.52.257.882.8162.538.567.543.524HG112X24JJ
1-3/4×18 28,00055.041.752.69.43.3853.3835.3859.1841.1818HG134X18JJ
1- 3/4×24 28,00063.361.752.69.43.3865.3841.3871.1847.1824HG134X24JJ
2×24 37,00094.2522.6211.863.6969.5445.5476.7252.7224HG2X24JJ
2-1/2×24 75,000198.002.753.6815.224.1974.7550.7585.561.524HG212X24JJ
Hot dip galvanized • End fittings are quenched and tempered, bodies are normalized
NEVER EXCEED PUBLISHED WORKING LOAD LIMIT. ALWAYS READ AND UNDERSTAND THE GENERAL WARNINGS AND INFORMATION